The best ways to clean fabric face masks

The best ways to clean fabric face masks

2020-04-09 12:45:19

Cloth face masks can be reused, but they have a limited life span. (Al3xanderD/Pixabay/)

Follow all of PopSci’s COVID-19 coverage here, including how to make your own face masks, how to make your own hand sanitizer, and the latest findings on the virus itself. For global updates, see here.

The Centers for Disease Control and Protection has encouraged people to wear cloth masks at all times while outside. Research shows that although they’re not great protection against airborne COVID-19 particles, they’re better than nothing.

And although we don’t need a lot of masks because we’re not supposed to leave the safety of our homes for anything other than essential shopping and some good ol’ outdoor recreation—keeping away from other people, of course—chances are we’ll need to reuse the ones we have. This is why we need to sanitize them after every use.

Be warned though—these methods are only good for killing viruses and bacteria on masks made out of cloth like cotton or polypropylene. If you happen to have some surgical masks and are trying to figure out how to reuse them, let us stop you right there.

“Surgical masks are made out of a really soft cloth that’s just a small bit stronger than a paper towel, and its components can be heavily damaged by some of the agents that you might use in the home,” says Rachel Noble, a microbiologist and professor at the University of North Carolina at Chapel Hill.

Applying any of the following methods to surgical masks will unequivocally make them either less effective or entirely ineffective against airborne microorganisms possibly carrying COVID-19. But if you do them right, they should thoroughly clean cloth masks, at least given what we know about the new coronavirus.

Boiling

We're all for not wasting water, but please do not cook spaghetti in your mask-water.

We’re all for not wasting water, but please do not cook spaghetti in your mask-water. (Michal Balog / Unsplash/)

An easy way to sanitize your face masks is to let them sit in boiling water for five minutes. It’s as simple as that.

The downside is that depending on the cloth your mask is made of, a few rounds of boiling could damage it or affect breathability.

“Cloth face masks are going to have a lifetime—they deteriorate the same way your bed sheets fall apart wash, after wash, after wash,” says Noble.

To ensure your mask remains functional after boiling, you’ll need to inspect it closely—hold the mask up to a light source and check for any thin areas where a small hole might be forming. Viruses are only 60 nanometers across, which means they can slip right through any loose-woven or damaged fabric. To be on the safe side, Noble recommends not boiling your mask more than 10 times.

Washing machine

Wash your masks with any clothes you've worn outside. If you don't have enough to complete a load, keep them in a plastic bag separate from the rest of your laundry.

Wash your masks with any clothes you’ve worn outside. If you don’t have enough to complete a load, keep them in a plastic bag separate from the rest of your laundry. (Steve Buissinne / Pixabay /)

Tossing your face masks—along with all clothes worn outside—in a hot-water laundry cycle is a great way to sanitize them. Just as hand soap disintegrates the virus by breaking its exterior, your trusty detergent will be enough to leave your face masks ready for another use. Pay special attention to temperature, though, Noble says—it’s an added layer of protection.

Water heated to 140 degrees Fahrenheit has proven effective at degrading most viruses, and both the World Health Organization and the UK’s National Health Service recommend this temperature for treating contaminated clothes and fabrics. But because a 140-degree shower would burn your skin, most people’s water heaters are set to 120 degrees. “A lot of viruses will be inactivated at that temperature, but they won’t completely be obliterated,” Noble explains.

Some modern washing machines have internal water heaters that can push water beyond 120 degrees, but if you don’t have one of these, we still don’t recommend you change your water heater’s settings. No matter what your machine is capable of, you should call for reinforcements. This is not the time to try doing your laundry without detergent. Make sure you load your machine with the appropriate amount of soap and complement it with your laundry booster of choice: Chlorine, color-safe bleach, or OxiClean will provide some extra oomph.

If there are still any pathogens the machine didn’t kill during the washing cycle, you can be sure you’ll finish them after five to 10 minutes at high heat in the dryer.

Hot water and bleach solution

It's bleach's time to shine.

It’s bleach’s time to shine. (Kelly Sikkema/Unsplash/)

If you’re still waiting to have enough clothes for a load of laundry, or simply do not feel like waiting for water to boil, Noble suggests soaking your face masks for five minutes in a solution of one teaspoon of bleach for every quart of hot water. Temperature doesn’t really matter—the bleach is doing the sanitation work—but it’s an extra layer of security.

You’ll need to be careful, though—using a higher concentration of bleach or leaving any of the corrosive chemical on the fabric after soaking could damage your mask. Also, since your face mask will be directly over your nose and mouth, you’ll want it to be clear of bleach when you put it on. Inhaling any residual fumes from it could damage your airways or worsen any respiratory condition.

To make sure you get rid of any leftover bleach, take the mask out of the solution and rinse it under a tap for 10 to 15 seconds—any temperature. After that, soak it in clean water for another five minutes. You can hang your masks to dry or put them in the dryer at high temperature for some extra sanitization.

Add time for a devastating combo move

Yes, we hate waiting too. But you do know that while you wait for your mask to be ready again, there are a lot of other things you can do other than looking longingly through the window. Right?

Yes, we hate waiting too. But you do know that while you wait for your mask to be ready again, there are a lot of other things you can do other than looking longingly through the window. Right? (Anthony Tran/Unsplash/)

Sanitizing face masks is one action where the premise “the more, the better” definitely applies. Each of the methods above will do on their own, but if you’re still wary or want to be extra sure you’re not running any risks, you can use time to your advantage, too.

COVID-19 particles have a limited life span depending on the surface they end up on, and even though we have an idea of how long the virus can live on certain materials, there’s still uncertainty when it comes to porous surfaces. Some reports show the virus degrades after two days on cloth or cardboard, but others have found traces of it on those materials after six or seven days.

If you were to use time as your sole method of face mask sanitization, you would have to assume COVID-19 particles will be active for at least one week—the worst-case scenario. You’d have to leave your face masks in a secure place (like your basement) for at least seven days before thinking of reusing them. But even though the virus might waste away, bacteria and other microbes might fester.

That’s why, according to Noble, a good sanitizing combo would be to boil, wash, or bleach your face masks, then let them sit for a week.

Storage is everything

Sanitizing your mask won’t change a thing if you don’t store it properly. Once you have a clean mask, put it in a closed plastic container or a new zip-close bag by itself.

If you want to go the extra mile, write on the bag or stick a note to the container with details about when you last sanitized the mask and the method you used. This will prevent cross-contamination and you’ll be able to tell for sure if the mask is safe to use or not.

What not to do

You might have read about UV lights and are wondering why we didn’t include it on this list. Well, using them to disinfect masks is not as simple as it sounds.

First of all, you’d have to use the right kind of wavelength: UV-C, according to Noble. You can often find this kind of light in sterilization wands, but these come in a wide range of shapes, sizes, and prices, so it’s difficult to know for sure if they have been found to be effective against various pathogens—especially since we don’t know much about COVID-19 yet.

Also, face masks—whether they’re DIY or store-bought—have pleats and creases that allow the material to expand and cover as much of your face as possible. When UV light hits a mask, these folds become a problem.

“It is hard to get the entire surface of a mask properly irradiated,” says Noble. “The UV light is only going to degrade the viruses on the surface, not the ones in the shade.”

That’s why although UV lights are widely used to sanitize personal protection items in healthcare and lab settings, this method is often complemented by other disinfection processes, such as bleach or hydrogen peroxide.

You may have also encountered people saying microwaving cloth masks is a fast and easy way to sanitize them. That is technically true, but it’s not as simple as just cooking your mask for a couple minutes, especially since some microwaves can catch certain types of cloth on fire.

Microwave settings are not standard, so it’s hard for any guide to account for the strength of each person’s microwave while also keeping them from burning small holes on their masks. And that’s not even considering that proper face masks have a metal noseband that definitely won’t play nice with your microwave.

To be on the safe side, we recommend you stay away from the microwave—a rule that also applies to reheating pizza.

Source link

To Return to News Page – click here

Share this

0 Comments

Leave a reply

Your email address will not be published. Required fields are marked *

*